FREE SHIPPING OVER $30— Shopping Made Simple.
Showing 1–20 of 73 results
Upgrade your coil packs to the better performing Audi R8 coil packs! Kit includes CNC machined billet aluminum adapter plates allow you to install newer, more reliable R8 coils on your 1.8T 20V. Plates are available in anodized Red or Black finish (choose your color option above). Installation hardware is included! Optionally add spark plugs…
If your 1.8T is chipped this is a complete kit that will keep it running smooth and allow you to reach maximum performance. Here is whats included in the kit: New D Revision Coilpacks (set of 4) New Spark plugs (select from the following) NGK PFR6Q – Platinum (stock) NGK PFR7B – Platinum (chipped) recommended!…
If your 1.8T is chipped this is a complete kit that will keep it running smooth and allow you to reach maximum performance. Heres whats included in the kit: Bolt down “E” Revision Coilpacks (set of 4) New Spark plugs (select from the following) NGK PFR6Q – Platinum (stock) NGK PFR7B – Platinum (chipped) recommended!…
Is your 1.8T lagging lately. Doesn’t feel quite as peppy as it once did? Included in this kit is everything you need to perform a performance tune-up for your 1.8T. Comes with the following parts: Oil Filter (OEM Mann brand) Drain plug w/washer 5 Quarts of Lubro Moly German Synthetis Oil (5w-40) New Genuine VW…
Kit Includes: – (2) Retaining Nuts M10 (VW/Audi)– (2)M10x55x32 Retaining Bolts Part #’s Retaining Nuts M10 N10-332-002 / N10 332 002 / N10332002 N10-261-310 / N10 261 310 / N10261310 N10-261-302 / N10 261 302 / N10261302 N01-510-02 / N01 510 02 / N0151002 Retaining BoltsM10x55x32 N90-596-906 / N90 596 906 / N90596906 N90-596-901 /…
Worn old bushing can create slop and play in the way your suspension feels and not mention make your car unsafe to drive. This Kit contain allpolyurethane bushing to make your suspension tighter then it was when the car is brand new. Poly bushings also last at least twice if not 3 times longer then…
This mount kit has the engine and transmission mounts along with the associated hardware to replace them. Tighten up those aging rubber mounts and feel factory fresh! Kit Includes the following: (1) Engine Mount (Right)(1) Engine Mount (Rear / Pendulum)(1) Manual Transmission Mount (Left)(1) Bolt (M10x55 / M6x12)(5) Bolt (M12x1.5×70)(5) Bolt (M10x55x32)(1) Hex Bolt (M10x75)(1)…
Retain an OEM look with this complete replacement Dogbone mount with pre-installed Energy Suspensions Polyurethane Bushings. Priced at a Fraction of the competitions kit they sell for $99! This mod will greatly reduce engine movement and limit wheel hop! Under hard acceleration, your entire engine and transmission actually rotates due to compliance in the factory…
Got too much engine rock there is a good chance engine mounts are shot. This kit includes all three engine mounts including an upgraded Heavy Duty transmission mount. Front Engine Mount – 1H0199609K(Aftermarketbrand) Rear Engine Mount – 1H0199262K(Aftermarketbrand) Transmission HD Mount – 357199381C (Aftermarketbrand) FITS: Mk3 Golf/Jetta VR6, Corrado VR6, B4 Passat VR6
Complete bolt kit for when installing Mk3 VR6 engine mounts. Kit includes: N01953310 x qty 4 – Rear and trans side bolts N10241605 x qty 1 – Trans top bolt N10070403 x qty 1 – Front top bolt N10230201 x qty 2 – Front and Rear bottom bolts N91127001 x qty 1 – Rear top…
This Kit provides every part you need to professionally install both Left & Right Engine Mount on your 2.0T B8 Audi. Lemfoerder is an OEM Engine Mount manufacturer for Volkswagen. The Lemfoerder Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace….
This Kit Includes both Vaico Engine and Transmission Mounts for your Automatic 2.0T B6 Passat or CC. Our VAICO products are made by high-quality materials and undergo strict quality tests. They are, thereby, the perfect alternative to the original part. Part #’s Engine Mount 1K0-199-262-M / 1K0199262 M / 1K0 199 262 M / 1K0199262M…
Complete kit to rebuild the bottom end of your 1.8T engine. Kit includes: – Piston Rings Set (Per Engine), 1.8T Std 81mm – Grant (058198151BG) or Geotze (06B198151B)– Thrust Bearing Set, 4cyl VW – Glyco (026198421)– Rod Bearing Set, 1.8T – Glyco 19mm (06B198501) or Mahle 20mm (034105701007)– Main Bearing Set, 1.8T – Glyco (06B198491)…
Complete kit to rebuild the bottom end of your 2.0L ABA engine. Kit includes: – Piston Rings Set (Per Engine), 2.0L ABA Std 82.5mm – Goetze (06A198151CG)– Rod Bearing Set, 2.0L – Mahle 20mm (034198501BR)– Main Bearing Set, 2.0L – Glyco (026198491) Visit bundle page to edit the bundle
Complete kit to rebuild the bottom end of your 2.0T FSi engine. Kit includes: Piston Rings Std 82.5mm – 06D198151E x qty 4 (Kolbenschmidt) Rod Bearing Set – 06B198501(Kolbenschmidt/Glyco) Thrust Bearing Set – 06A105637A (Kolbenschmidt) Main BearingSet –06B105591007 (Mahle) NOTE: This kit includes standard sizerings and bearings.
When servicing your exhaust manifold it is very common that all the hardware is rusted out. This Kit provides you with all the hardware to professionally service yourexhaust manifold. Kit Includes: – (10) Exhaust manifold studs– (10) Washers– (10) Locking nuts M8x1.25 Part #’s Exhaust manifold studs N90-188-902 / N90 188 902 / N90188902 Washers…
Kit is for use with ALL 12v VR6 engines This kit includes the hardware and gaskets you’ll likely need during your exhaust manifold replacement. Kit includes: (10) Exhaust manifold studs (GENUINE / ARP)(10)Washers(GENUINE / ARP)(10)Locking nuts(GENUINE / ARP)(1) Cyl1-3Exhaust manifold gasket (GENUINE)(1)Cyl4-6 Exhaust manifold gaskets(GENUINE)(2) Downpipe gaskets(GENUINE) Part #’s Exhaust manifold studsN90-188-902 / N90 188…
This kit includes the hardware and gasket you’ll likely need during your exhaust manifold replacement. Kit includes: Exhaust manifold studs (N90188902 x qty13) Exhaust manifold gasket (058253039L Victor Reinz) Locking nuts (N90200201 x qty 13) Optional – Washers (N90357201 x qty 13) Fits ALL 1.8T engines. Part #’s Exhaust Manifold Studs N90-188-902 / N90 188…
This kit includes All the hardware and All the gaskets you’ll likely need during your exhaust manifold / k03 / k04 turbo replacement. Kit includes: Exhaust manifold studs – (N90188902 x qty13) Exhaust manifold gasket –(058253039L Victor Reinz) Locking nuts – (N90200201 x qty 13) Washers – (N90357201 x qty 13) Turbo to Downpipe Studs…
This kit includes All the hardware and All the gaskets you’ll likely need during your exhaust manifold / k03 / k04 turbo replacement. Kit includes: Exhaust manifold studs – (N90188902 x qty13) Exhaust manifold gasket –(058253039L Victor Reinz) Locking nuts – (N90200201 x qty 13) Washers – (N90357201 x qty 13) Turbo to Downpipe Studs…
Grams Performance 100 Micron Replacement Filter Element
1 × $31.19 
aFe Magnum FORCE Cold Air Intake System Spare Parts Kit SAE (11/16in ID to 1-1/2in ID Range)
1 × $3.19 
H&R OE Sport Springs | BMW E82 128i | 135i
1 × $98.00 
Engine Coolant Outlet Gasket L167898123
1 × $3.99 End Link Hardware Kit - VW/Audi / 2.0L / TDi / Mk4 Golf & Jetta
1 × $14.39 Subtotal: $150.76